skip to main content
Ngôn ngữ:
Giới hạn tìm kiếm: Giới hạn tìm kiếm: Dạng tài nguyên Hiển thị kết quả với: Hiển thị kết quả với: Dạng tìm kiếm Chỉ mục

Tribomechanical Properties of Polymeric Composites Based on Mixture of Ultra High Molecular Weight Polyethylene and Polyamide

Applied Mechanics and Materials, 2015-06, Vol.770, p.87-92 [Tạp chí có phản biện]

2015 Trans Tech Publications Ltd ;Copyright Trans Tech Publications Ltd. Jun 2015 ;ISSN: 1660-9336 ;ISSN: 1662-7482 ;ISBN: 303835483X ;ISBN: 9783038354833 ;EISSN: 1662-7482 ;DOI: 10.4028/www.scientific.net/AMM.770.87

Tài liệu số/Tài liệu điện tử

Trích dẫn Trích dẫn bởi
  • Nhan đề:
    Tribomechanical Properties of Polymeric Composites Based on Mixture of Ultra High Molecular Weight Polyethylene and Polyamide
  • Tác giả: Ivanova, Larisa R. ; Shilko, Sergey V. ; Panin, Sergey ; Thuc, Nguyen Xuan ; Poltaranin, Mikhail A. ; Kornienko, Ludmila
  • Là 1 phần của: Applied Mechanics and Materials, 2015-06, Vol.770, p.87-92
  • Mô tả: In order to find out optimum filler to increase manufacturability (extrudability) of composites based on ultra-high molecular weight polyethylene (UHMWPE) matrix as well as to develop polymer-polymeric composites with improved tribological characteristics, the structure, mechanical properties and wear resistance of UHMWPE mixtures with elasticizing block-copolymer PA-b-LLDPE (UHMWPE + PA-b-LLDPE) was investigated under dry sliding friction. Applied aspect of the study is related to the selection of commercially available fillers being compatible with UHMWPE for manufacturing anti-frictional extrudable nanocomposites. It is shown that as compared with pure UHMWPE mechanical properties (ultimate strength, value of elongation at failure) do not vary substantially, but the wear rate under dry sliding friction of polymeric composites UHMWPE + n wt.% PA-b-LLDPE is reduced only when block copolymer weight fraction is less than ≤ 5 wt.%. By the polymeric filling an important technological characteristic - specific pressure of extrusion (that is proportional to melt flow index) might be decreased. Permolecular structure and wear track surfaces of polymer-polymer composites UHMWPE + n wt.% PA-b-LLDPE was examined and numerically characterized.
  • Nơi xuất bản: Zurich: Trans Tech Publications Ltd
  • Ngôn ngữ: English
  • Số nhận dạng: ISSN: 1660-9336
    ISSN: 1662-7482
    ISBN: 303835483X
    ISBN: 9783038354833
    EISSN: 1662-7482
    DOI: 10.4028/www.scientific.net/AMM.770.87
  • Nguồn: ProQuest Central
Trở lại danh sách kết quả
INSPIRE LIBRARY - TON DUC THANG UNIVERSITY (84-028) 37 755 057 Feedback
19 Nguyen Huu Tho St. Dist.7, HCM thuvien@tdtu.edu.vn

Copyright © 2017 INSPIRE LIBRARY - TON DUC THANG UNIVERSITY

Đang tìm Cơ sở dữ liệu bên ngoài...