skip to main content
Language:
Search Limited to: Search Limited to: Resource type Show Results with: Show Results with: Search type Index

The application of dual-layer remote phosphor geometry in achieving higher color quality of WLEDs

Telkomnika, 2021-04, Vol.19 (2), p.616-622 [Peer Reviewed Journal]

2021. This work is published under https://creativecommons.org/licenses/by/3.0/ (the “License”). Notwithstanding the ProQuest Terms and Conditions, you may use this content in accordance with the terms of the License. ;ISSN: 1693-6930 ;EISSN: 2087-278X ;DOI: 10.12928/telkomnika.v19i2.16706

Full text available

Citations Cited by
  • Title:
    The application of dual-layer remote phosphor geometry in achieving higher color quality of WLEDs
  • Author: Thi, My Hanh Nguyen ; That, Phung Ton ; Ngoc, Hoang Van
  • Subjects: Beer law ; Cerium ; Color temperature ; Efficiency ; Europium ; Heat ; Light emitting diodes ; Lighting ; Mie scattering ; Phosphors ; Rendering
  • Is Part Of: Telkomnika, 2021-04, Vol.19 (2), p.616-622
  • Description: If remote phosphor structures are put into comparison with conformal phosphor or in-cup phosphor, their luminous flux are better, but the color quality is not as elevated. This leads to an obvious need of a practical solution to enhance color quality. Therefore, many studies were carried out to achieve this purpose, and so is ours. We proposed using two layers of phosphor in WLEDs to achieve better rendering ability and chromatic performance. The identical WLEDs with different color temperatures, 5600 K-8500 K, were used and reported in this paper. Our research consists of two parts, which are placing a layer of red phosphor SrwFxByOz:Eu2+,Sm2+ on the yellow YAG:Ce3+ phosphor layer at first, and then specifying an appropriate SrwFxByOz:Eu2+,Sm2+ concentration to reach the highest color performance. It is shown that with the contribution of SrwFxByOz:Eu2+,Sm2+, the color rendering index (CRI) and color quality scale (CQS) are increased. This can be explained by the increased amount of red light components in the WLEDs when the concentration of SrwFxByOz:Eu2+,Sm2+ was greater. However, excessive SrwFxByOz:Eu2+,Sm2+ will cause the reduction in the flux, which has been proven by the application of Mie scattering and the Lambert-Beer law. Therefore, the conclusion will present an optimal amount of SrwFxByOz:Eu2+,Sm2+ to obtain high color quality while minimizing the light loss.
  • Publisher: Yogyakarta: Ahmad Dahlan University
  • Language: English
  • Identifier: ISSN: 1693-6930
    EISSN: 2087-278X
    DOI: 10.12928/telkomnika.v19i2.16706
  • Source: ProQuest Central
Back to results list
INSPIRE LIBRARY - TON DUC THANG UNIVERSITY (84-028) 37 755 057 Feedback
19 Nguyen Huu Tho St. Dist.7, HCM thuvien@tdtu.edu.vn

Copyright © 2017 INSPIRE LIBRARY - TON DUC THANG UNIVERSITY

Searching Remote Databases, Please Wait