skip to main content
Ngôn ngữ:
Giới hạn tìm kiếm: Giới hạn tìm kiếm: Dạng tài nguyên Hiển thị kết quả với: Hiển thị kết quả với: Dạng tìm kiếm Chỉ mục

Mechanical properties of recycled PET fibers in concrete

Materials research (São Carlos, São Paulo, Brazil), 2012-08, Vol.15 (4), p.679-686 [Tạp chí có phản biện]

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. ;ISSN: 1516-1439 ;ISSN: 1980-5373 ;EISSN: 1980-5373 ;DOI: 10.1590/S1516-14392012005000088

Tài liệu số/Tài liệu điện tử

Trích dẫn Trích dẫn bởi
  • Nhan đề:
    Mechanical properties of recycled PET fibers in concrete
  • Tác giả: Pelisser, Fernando ; Montedo, Oscar Rubem Klegues ; Gleize, Philippe Jean Paul ; Roman, Humberto Ramos
  • Chủ đề: Compressive strength ; Concretes ; ENGINEERING, CHEMICAL ; Fiber reinforced concretes ; fiber-reinforced concrete ; Fibers ; Fibres ; MATERIALS SCIENCE, MULTIDISCIPLINARY ; Mechanical properties ; METALLURGY & METALLURGICAL ENGINEERING ; Modulus of elasticity ; Polyethylene terephthalates ; recycled PET ; synthetic fibers
  • Là 1 phần của: Materials research (São Carlos, São Paulo, Brazil), 2012-08, Vol.15 (4), p.679-686
  • Mô tả: Fibre-reinforced concrete is important in the search for more efficient crack-resistant concrete. Polyethylene terephthalate (PET), a polyester polymer obtained from recyclable bottles, has been widely used to produce fibres to obtain cement-based products with improved properties. Recycled-bottle-PET fibre-reinforced concrete was studied experimentally. Fibres of length 10, 15 and 20 mm and volume fractions of 0.05, 0.18 and 0.30% relative to the volume of the concrete were used. Physical and mechanical properties of the concrete were investigated, including compressive strength, flexural strength, Young's modulus and fracture toughness, as well as analysis using mercury intrusion porosimetry (MIP) and SEM. Flexure and impact tests were performed after 28 and 150 days. No significant effect of the fibre addition on the compressive strength and modulus of elasticity was observed. However, the Young's modulus decreased as the fibre volume increased. At 28 days, the concrete flexural toughness and impact resistance increased with the presence of PET fibres, except for the 0.05 vol% sample. However, at 150 days, this improvement was no longer present due to recycled-bottle-PET fibre degradation in the alkaline concrete environment, as observed by SEM. An increase in porosity also occurred at 365 days for the fibre-reinforced concrete, as determined by MIP.
  • Nơi xuất bản: ABM, ABC, ABPol
  • Ngôn ngữ: English;Portuguese;Spanish
  • Số nhận dạng: ISSN: 1516-1439
    ISSN: 1980-5373
    EISSN: 1980-5373
    DOI: 10.1590/S1516-14392012005000088
  • Nguồn: SciELO
    GFMER Free Medical Journals
    DOAJ Directory of Open Access Journals
Trở lại danh sách kết quả
Về trang trướcTrước Kết quả  4 Tiếp theoTới trang tiếp theo
INSPIRE LIBRARY - TON DUC THANG UNIVERSITY (84-028) 37 755 057 Feedback
19 Nguyen Huu Tho St. Dist.7, HCM thuvien@tdtu.edu.vn

Copyright © 2017 INSPIRE LIBRARY - TON DUC THANG UNIVERSITY

Đang tìm Cơ sở dữ liệu bên ngoài...