skip to main content
Language:
Search Limited to: Search Limited to: Resource type Show Results with: Show Results with: Search type Index

Tensile, compressive, and fatigue strength of a quasi-isotropic carbon fiber reinforced plastic laminate with a punched hole

Heliyon, 2020-12, Vol.6 (12), p.e05690-e05690, Article e05690 [Peer Reviewed Journal]

2020 The Author(s) ;2020 The Author(s). ;2020 The Author(s) 2020 ;ISSN: 2405-8440 ;EISSN: 2405-8440 ;DOI: 10.1016/j.heliyon.2020.e05690 ;PMID: 33336099

Full text available

Citations Cited by
  • Title:
    Tensile, compressive, and fatigue strength of a quasi-isotropic carbon fiber reinforced plastic laminate with a punched hole
  • Author: Ueda, Masahito ; Cuong, Vu Manh ; Yamanaka, Atsushi ; Sakata, Kazuhiro
  • Subjects: Automotive engineering ; Failure ; Joints ; Machining ; Materials processing ; Materials science ; Mechanical engineering ; Polymer-matrix composites
  • Is Part Of: Heliyon, 2020-12, Vol.6 (12), p.e05690-e05690, Article e05690
  • Description: The mechanical properties of a quasi-isotropic carbon fiber reinforced plastic (CFRP) laminate with a punched hole were investigated. During the punching process, pressure was applied to the laminate through the upper and lower blank holders of a punching machine; the clearance between the punch and blank holders was set to be small to suppress damage in the CFRP laminates. Due to the dragging of plies encountered during punching, the surface of the punched hole was relatively uneven as compared to that of the drilled hole. However, the effect of the uneven surface created during the punching process was not as significant on the tensile and compressive strength of the open hole as compared to the manufacturing damages generated by drilling processes. The stress–number of cycles to failure curves for the open-hole tension–tension fatigue tests also showed comparable results between the punched- and drilled-hole specimens. These results indicate that there were no significant differences in the mechanical properties of CFRP laminates with a punched hole, and thus present the possibility of a highly productive hole-making process using the punching method. Materials science; Mechanical engineering; Automotive engineering; Machining; Materials processing; Polymer-matrix composites; Failure; Joints
  • Publisher: England: Elsevier Ltd
  • Language: English
  • Identifier: ISSN: 2405-8440
    EISSN: 2405-8440
    DOI: 10.1016/j.heliyon.2020.e05690
    PMID: 33336099
  • Source: PubMed Central
    ROAD: Directory of Open Access Scholarly Resources
    DOAJ Directory of Open Access Journals
Back to results list
INSPIRE LIBRARY - TON DUC THANG UNIVERSITY (84-028) 37 755 057 Feedback
19 Nguyen Huu Tho St. Dist.7, HCM thuvien@tdtu.edu.vn

Copyright © 2017 INSPIRE LIBRARY - TON DUC THANG UNIVERSITY

Searching Remote Databases, Please Wait