skip to main content
Language:
Search Limited to: Search Limited to: Resource type Show Results with: Show Results with: Search type Index

Evaluation of the effect of optimal fit criteria on the compressive strength of open mortise and tenon corner joints

European journal of wood and wood products, 2020-03, Vol.78 (2), p.351-363

The Author(s) 2020 ;European Journal of Wood and Wood Products is a copyright of Springer, (2020). All Rights Reserved. This work is published under http://creativecommons.org/licenses/by/4.0/ (the “License”). Notwithstanding the ProQuest Terms and Conditions, you may use this content in accordance with the terms of the License. ;ISSN: 0018-3768 ;EISSN: 1436-736X ;DOI: 10.1007/s00107-020-01509-w

Full text available

Citations Cited by
  • Title:
    Evaluation of the effect of optimal fit criteria on the compressive strength of open mortise and tenon corner joints
  • Author: Elek, László ; Kovács, Zsolt ; Csóka, Levente ; Agarwal, Charu
  • Subjects: Biomedical and Life Sciences ; Ceramics ; Composites ; Compressive strength ; Corner joints ; Glass ; Glued joints ; Life Sciences ; Machines ; Manufacturing ; Measuring instruments ; Milling machines ; Natural Materials ; Original ; Processes ; Reproducibility ; Thickness measurement ; Wood Science & Technology
  • Is Part Of: European journal of wood and wood products, 2020-03, Vol.78 (2), p.351-363
  • Description: The study examines the degree of deviation from the nominal size of the produced open full-width mortise and tenon joint elements for their optimal pairing based on the measured thickness and gap width data. The characteristics of the measuring devices used were analysed by the repeatability and reproducibility test. The compressive strength of the single-glued joints (where only the surfaces of the tenon were glued) and double-glued joints (where the surfaces of both the mortise and tenon elements were glued) for various joint fit categories was also determined. It was found that despite the huge number of produced test specimens and their measurements, the joint fits could be maintained with the milling machine and tools. The thickness of the joint could be characterized by measuring the data at the centre of the tenon, whereas the gap width of the mortise could be characterized by measuring the data on the side of the tool leaving the wood. The double-glued joints showed higher breaking force and displacement values as compared to the single-glued joints. The joints were found to be the strongest at a tight fit of 0.1 mm.
  • Publisher: Berlin/Heidelberg: Springer Berlin Heidelberg
  • Language: English
  • Identifier: ISSN: 0018-3768
    EISSN: 1436-736X
    DOI: 10.1007/s00107-020-01509-w
  • Source: Springer Nature OA/Free Journals
    ProQuest Central
Back to results list
INSPIRE LIBRARY - TON DUC THANG UNIVERSITY (84-028) 37 755 057 Feedback
19 Nguyen Huu Tho St. Dist.7, HCM thuvien@tdtu.edu.vn

Copyright © 2017 INSPIRE LIBRARY - TON DUC THANG UNIVERSITY

Searching Remote Databases, Please Wait