skip to main content
Ngôn ngữ:
Giới hạn tìm kiếm: Giới hạn tìm kiếm: Dạng tài nguyên Hiển thị kết quả với: Hiển thị kết quả với: Dạng tìm kiếm Chỉ mục

Modelling of dewatering wood pulp in a screw press using statistical and multivariate analysis

Bioresources, 2020-08, Vol.15 (3), p.5899-5912 [Tạp chí có phản biện]

2020. Notwithstanding the ProQuest Terms and Conditions, you may use this content in accordance with the terms available at https://bioresources.cnr.ncsu.edu/about-the-journal/editorial-policies ;ISSN: 1930-2126 ;EISSN: 1930-2126 ;DOI: 10.15376/biores.15.3.5899-5912

Tài liệu số/Tài liệu điện tử

Trích dẫn Trích dẫn bởi
  • Nhan đề:
    Modelling of dewatering wood pulp in a screw press using statistical and multivariate analysis
  • Tác giả: El Idrissi, Bouchaib ; Loranger, Éric ; Lanouette, Robert ; Bousquet, Jean Pierre ; Martinez, Mark
  • Chủ đề: Design of experiments ; Dewatering ; Energy consumption ; Experimental design ; Experiments ; Inlet pressure ; Mathematical models ; Multivariate analysis ; Parameters ; Performance evaluation ; Prediction models ; Pulp ; Software ; Statistical analysis ; Statistical models ; Wood pulp
  • Là 1 phần của: Bioresources, 2020-08, Vol.15 (3), p.5899-5912
  • Mô tả: Statistical modeling of a screw press was established by using an experimental design based on the screw rotational speed, the pulp feed consistency, the pulp feed suspension freeness, the inlet pressure, and the counter-pressure at the discharge end. The statistical models showed that the screw press outputs for each pulp could be predicted. When including all data in a global model to predict the outputs of the press for any pulp, a global statistical model was found not to be efficient by using just the five fixed parameters. The solution to this problem was to use a multivariate analysis to include more parameters, mainly about the fiber characteristics (crowding factor, fiber length, fiber width, and fines content). By including these fiber properties, the differences between each pulp were more properly analyzed. The multivariate analysis predicted the press outsets very well in a global model by using eight parameters instead of five. The R2 values of the multivariate prediction model were all higher than 0.70 and had the goodness of prediction (Q2¬¬¬) higher than 0.60.
  • Nơi xuất bản: Raleigh: North Carolina State University
  • Ngôn ngữ: English
  • Số nhận dạng: ISSN: 1930-2126
    EISSN: 1930-2126
    DOI: 10.15376/biores.15.3.5899-5912
  • Nguồn: GFMER Free Medical Journals
    ROAD: Directory of Open Access Scholarly Resources
    ProQuest Central
    DOAJ Directory of Open Access Journals
Trở lại danh sách kết quả
Về trang trướcTrước Kết quả  3 Tiếp theoTới trang tiếp theo
INSPIRE LIBRARY - TON DUC THANG UNIVERSITY (84-028) 37 755 057 Feedback
19 Nguyen Huu Tho St. Dist.7, HCM thuvien@tdtu.edu.vn

Copyright © 2017 INSPIRE LIBRARY - TON DUC THANG UNIVERSITY

Đang tìm Cơ sở dữ liệu bên ngoài...